3D列印內核｜3D Printed Core Layer
抗菌疏水材料｜Antibacterial
3D 打印核心層為 TPU 疏水性材料，水接觸角 為 90 度，約為海綿的 2-3倍，抗菌性能高海綿 10 倍以上，並可訂制銀離子 TPU，提供更好的 抗菌性能。
A hydrophobic material TPU with a water contact angle of 90 degrees, which is about 2-3 times higher than a sponge. Its antibacterial performance is over 10 times higher than that.
抗撕裂、耐重、耐洗｜Tear resistance
TPU抗撕裂強度為 80Kn/M ，約為海綿的 20 倍，不管高體重騎行或是洗衣機清洗，都 能承受更高重量、長時間的擠壓而不開裂 。
TPU has a tear resistance of 80 kN/m, which is about 20 times higher than that of a sponge.
透氣、速乾｜Breathability and Wicked
完全中空的打印層，空氣能直接流通，超越海綿數萬 倍的通氣性，乾燥速度僅需海綿的 1/500 時間 。
With hollow structure, Allows direct air vetilation and 500 times faster drying compared to a sponge.
零耗損、無污染｜Zero Waste
製造過程零污染、零耗損，不需化學清洗，可選擇環 保回收 TPU 材料打印，環保永續。
The production process generates no pollution or waste, and no environmental assessments are required for production. It can also be made from recycled TPU.
耐疲勞、抗洗劑｜Fatigue resistance
TPU 材料可抵抗超過 150 萬次擠壓，耐用程度為 普通海綿的數百倍以上，並且不受到洗衣精的影響 而分解粉化 。
Lasts for 1.5 million cycles, which is about 1000 times higher than a sponge.
最佳重量 / 支撐比 ｜Light- Weight
每立方米約 3 公克重量，可達到的支撐強度約等於 300KG/ 立方米之高密度海綿 。
About 3 grams per cubic centimeter, with a weight and supporting force equivalent to a sponge with a density of 300 kg/cubic meter.
外型、色彩、密度、厚度、精度皆可訂製
可訂製外型、尺寸，15種現有色彩可選擇，亦可以依照用戶需求調色。
同時提供三種現有密度選擇，厚度自 4mm - 12mm ，亦可依照需求調整層數、密度。
Fully Customized
Multiple colors available, with custom blending upon request. Adjustable thickness and support strength based on customer needs, from our Taiwan lab.